Browse all practice questions for the AIM Block 13 Practice Test. Search by topic, open any question and review its full explanation, then test yourself in the practice quiz.

AIM Block 13 Practice Test course image
More practice questions

These questions are part of the practice quiz. Start practicing

  • Unducted fan propellers reach peak efficiency at about 85%. What happens to efficiency if the operation pushes tip speeds higher beyond that point?
  • Reduced blade vibration and improved airflow characteristics in gas turbines are brought about by which design feature?
  • Which statement is true for subsonic flow in a convergent nozzle?
  • Three types of turbine blades are
  • When interpreting a line graph over time, what is most crucial?
  • Which strategy best increases efficiency on a dense passage?
  • In a convergent nozzle, subsonic flow, which statement is true?
  • In the turbine section of a gas turbine engine, stators are reported to
  • The new Prop fan will be fitted with how many high-load, swept-back, curved blades?
  • Which blade types are used in turbines?
  • Which mechanism is used to stabilize compressor airflow during low-thrust operation?
  • If ball or roller bearings at engine overhaul are magnetized but otherwise defect-free, what must be done before use?
  • Placing an exhaust cone aft of the turbine causes the velocity in the first part of the exhaust duct to
  • Solve x^2 - 4 = 0. What are the solutions for x?
  • From where is the APU fuel normally supplied during operation?
  • What is the function of the exhaust cone assembly in a turbine engine?
  • When the leading edge of a first-stage turbine blade shows stress rupture cracks, which condition should be suspected?
  • The stators in the turbine section of a gas turbine engine
  • The air passing through the combustion chamber of a turbine engine is
  • What is the primary purpose of the stator blades in the compressor?
  • What is the function of stator blades in the compressor section of an axial-flow turbine engine?
  • When starting a turbine engine, a hung start is indicated if the engine
  • What is meant by a double entry centrifugal compressor?
  • What is the major function of the turbine assembly in a turbojet engine?
  • Why is a control group important in an experiment?
  • Main bearing oil seals used with turbine engines are usually what type(s)?
  • Which is an advantage of the centrifugal-flow compressor?
  • True or False: The main advantage ultra-high bypass fans have over high-bypass turbofans is lower fuel consumption rate to thrust.
  • If bearings are magnetized but otherwise defect-free, what is the approved pre-use treatment?
  • Which statement correctly identifies the two entry types for centrifugal compressor impellers?
  • Which of the following influences the operation of an automatic fuel control unit on a turbojet engine?
  • Which component is used to diffuse airflow between stages in a turbine engine compressor?
  • Which step is typically the first in the scientific method?
  • In a bar chart, how do you identify the largest category?
  • The blades on ultra-high bypass turbofan engines are made up of which three materials?
  • The Brayton cycle is known as the constant ... cycle.
  • A turbine engine hot section is particularly susceptible to which type of damage?
  • What happens to the velocity of subsonic air as it flows through a convergent nozzle?
  • Which option correctly identifies a factual claim?
  • Who establishes the recommended operating time between overhauls (TBO) of a turbine engine used in general aviation?
  • Which statement about magnetized bearings is true?
  • One of the earliest steps in scientific investigations?
  • In which type of turbine engine combustion chamber is the case and liner removed and installed as one unit during routine maintenance?
  • A purpose of the shrouds on the turbine blades of an axial-flow engine is to
  • Five workers complete a job in 8 days. How many days would 10 workers take, assuming a constant rate?
  • Where is the highest gas pressure in a turbojet engine?
  • When synthesizing information from two passages, what is essential?
  • Which statement best distinguishes evidence-based reasoning from conjecture?
  • Which action most increases confidence in an inference drawn from a passage?
  • Dirt particles ingested into the compressor coat all components except which?
  • If a turbine engine cannot reach takeoff EPR before its EGT limit is reached, what does this indicate?
  • Which approach helps determine the author’s purpose?
  • Which statement best describes how the APU manages temperature when delivering high power and pneumatic load?
  • Generally, when maximum APU shaft output power is used with pneumatic power, pneumatic loading will be automatically modulated to maintain a safe
  • What is the first engine instrument indication of a successful start of a turbine engine?
  • Standard sea level pressure is
  • Which statement about interpreting a line graph is true?
  • Which of the following best describes a counterargument?
  • Which form is a valid conditional statement?
  • What should be done initially if a turbine engine catches fire when starting?
  • Which compressor arrangement is associated with split-spool architecture for starting flexibility?
  • Compressor field cleaning on turbine engines is performed primarily in order to
  • The turbine section of a jet engine
  • Which standard step is performed after replacing the fuel control unit on a turbine engine?
  • A mixture problem: 2 parts A at 20% and 3 parts B at 60% yield what overall percentage?
  • What constitutes a credible synthesis across two texts?
  • Which component's function includes straightening the airflow at the discharge end of the axial-flow compressor?
  • What is the main purpose of skim reading headings and topic sentences before detailed reading?
  • After replacement of the fuel control unit, what must be done to the engine?
  • Which statement correctly distinguishes a fact from an opinion?
  • Which statement best describes a stem-and-leaf display?
  • Dust ingestion can cause erosion damage to which parts?
  • During inspection, turbine engine components exposed to high temperatures may only be marked with such materials as allowed by the manufacturer. These materials generally include 1, 2, and 4.
  • A hypothesis is best described as what?
  • If a ratio a:b = 3:4 and the total parts equal 21, how many parts does b represent?
  • In turbine hot-section damage, which mechanism is most characteristic?
  • Which statement best describes the fallacy 'post hoc ergo propter hoc'?
  • A car travels 150 miles in 3 hours. What is its average speed?
  • The diffuser's role in a turbine engine is to
  • What does correlation imply about causation?
  • Which strategy helps identify author bias?
  • If a:b = 3:5 and a = 9, what is b?
  • In a scatter plot, which statement indicates a positive relationship?
  • What are the two basic elements of the turbine section in a turbine engine?
  • What is the primary function of the stator vanes in an axial-flow compressor?
  • Where are turbine nozzle diaphragms located relative to the turbine wheel?
  • What happens to the pressure of supersonic air as it flows through a divergent nozzle?
  • What happens to the velocity of subsonic air as it flows through a convergent nozzle?
  • A turbine engine compressor which contains vanes on both sides of the impeller is which type?
  • In a reading passage, which statement best captures the main idea?
  • An exhaust cone placed aft of the turbine in a jet engine will cause the pressure in the first part of the exhaust duct to
  • Turbine blades are generally more susceptible to operating damage than compressor blades because of which factor?
  • In reasoning, which term describes declaring a causal relationship without evidence due to correlation?
  • A 25% discount on an $80 item reduces the price to what?
  • In a syllogism, if all dogs are mammals and all mammals are animals, what is the conclusion?
  • If a data set has a maximum value of 120 and a minimum value of 20, what is the range?
  • If a turbine engine shows no change in power setting parameters but oil temperature is high, what is the possible cause?
  • In an axial-flow compressor, one purpose of the stator vanes at the discharge end of the compressor is to
  • What is one purpose of the stator blades in the compressor section of a turbine engine?
  • Inference vs assumption: which is supported by text evidence?
  • When two passages present similar claims, what should you look for to assess strength of the combined argument?
  • What is the purpose of the diffuser section in a turbine engine?
  • Which component diffuses the air within the compressor to slow it down?
  • When aircraft turbine blades are subjected to excessive heat stress, what type of failures would you expect?
  • Fuel is normally supplied to an APU from
  • What is the proper starting sequence for a turbojet engine?
  • In a dual axial-flow compressor, the first stage turbine drives
  • What is Newton's First Law generally termed?
  • Factor the quadratic x^2 - 5x + 6 = 0 and give its solutions.
  • Which data display is particularly suited for showing where individual data points fall within a distribution?
  • Which statement is true?
  • What is the function of the APU air inlet plenum?
  • What is the primary advantage of an axial-flow compressor over a centrifugal compressor?
  • Which two components perform the primary functions in a centrifugal compressor?
  • Generally, when starting a turbine engine, the starter should be disengaged
  • Which turbine engine compressor offers the greatest advantages for starting flexibility and improved high-altitude performance?
  • Which of the following best describes the blade count of the new prop fan?
  • Why is word choice important when determining tone?
  • To accomplish APU engine cooling before shutdown when necessary, one method is to
  • Which two elements make up the axial-flow compressor assembly?
  • Where do stress rupture cracks usually appear on turbine blades?
  • Which compressor arrangement provides the greatest starting flexibility and high-altitude performance?
  • When making an inference from a passage, what is the most reliable basis?
  • What is the function of the stator vane assembly at the discharge end of a typical axial-flow compressor?
  • In an axial-flow compressor, a pressure stage is formed by which arrangement?
  • In comparing two related passages, which criterion is most important?
  • What happens when the bleed air valve is opened during APU operation?
  • Which engine variable is the most critical during turbine engine operation?
  • What is the purpose of the process of elimination in multiple-choice tests?
  • Which component is used to start the APU during its start sequence?
  • What is the volume of a rectangular prism with length 3, width 4, and height 5?
  • The purpose of a bleed valve located in the beginning stages of the compressor is to
  • Which parameter influences the operation of an automatic fuel control unit on a turbojet engine?
  • The turbine engine component that helps to straighten flow and reduce turbulence in the discharge region of the axial-flow compressor is the
  • What does 'tone' mean in a text?
  • Hot spots on the tail cone of a turbine engine are possible indicators of a malfunctioning fuel nozzle or
  • The two types of centrifugal compressor impellers are which?
  • In a table with two variables showing positive correlation, which is likely true?
  • Which statement is a valid conditional form?
  • What is the correct starting sequence for a turbojet engine?
  • What is the procedure called for removing dirt deposits from compressor blades?
  • If a claim asserts a cause-effect relationship without evidence, which bias is most likely present?
  • Between each row of rotating blades in a turbine engine compressor, the stationary blades that diffuse the air are called what?
  • Stress rupture cracks on turbine blades typically appear
  • What is the difference between a theory and a hypothesis?
  • Who establishes the recommended operating time between overhauls (TBO) of a turbine engine used in general aviation?
  • If a turbine engine catches fire during starting, what is the recommended initial action?
  • Dirt particles ingested into the compressor tend to coat all components except which?
  • The compressor stators in a gas turbine engine act as diffusers to
  • Airlines of 400 passenger class will probably not convert to Unducted fan engine design.
  • Hot spots on the tail cone are possible indicators of a malfunctioning fuel nozzle or faulty combustion chamber.
  • Main bearing oil seals are typically what type?
  • The basic gas turbine engine is divided into two main sections: the cold section and the hot section. Which option correctly describes this statement?
  • What is the function of turbine nozzle diaphragms located on the upstream side of each turbine wheel in a gas turbine engine?
  • What feature characterizes a double entry centrifugal compressor?
  • The new prop fan engines will propel aircraft to approximately what Mach number?
  • The non-rotating axial-flow compressor airfoils in an aircraft gas turbine engine are called
  • What is the best way to identify an author's purpose in a passage?
  • If x^2 - 9 = 0, what are the solutions for x?
  • What type of blades used on ultra-high bypass turbofan engines allows safe operation and higher tip speeds than conventional propeller blades?
  • In a turbine engine with a dual-spool compressor, the low speed compressor
  • If all A are B and all B are C, which statement is true?
  • What is used in turbine engines to aid in stabilization of compressor airflow during low thrust engine operation?
  • When operating, the APU speed tends to
  • Pt7 is a designation used to label turbine discharge pressure in some manuals. Which of the following is Pt7 most closely associated with?
  • Evaluate the simplification: 4b - 3(2b - 6).
  • Anti-icing of jet engine air inlets is commonly accomplished by
  • If two variables show a perfect positive linear relationship on a scatterplot, how would the data points typically align?
  • What describes a control group’s function?
  • Which statement describes the purpose of a hypothesis in experimentation?
  • The area of a circle with radius 5 is approximately what, using π ≈ 3.14?
  • Which statement best describes the APU generator compared to engine-driven generators?
  • What is the ultimate limiting factor in turbine engine operation?
  • What type of turbine blade is most commonly used in aircraft jet engines?
  • Factor x^2 - 7x + 12 = 0 and provide the solutions.
  • Compute the mean of the values 2, 4, 6, 8.
  • Which line best shows the author’s tone as skeptical?
  • A weak fuel to air mixture along with normal airflow through a turbine engine may result in
  • Which statement would most weaken an argument?
  • What happens to the pressure of subsonic air as it flows through a convergent nozzle?
  • In vocabulary in context, what indicates the meaning of an unfamiliar word?
  • Which system directly controls the timing and quantity of fuel delivered to the APU?
  • Which statement best describes a well-formulated hypothesis?
  • The blades on ultra-high bypass turbofan engines are made up of which three materials?
  • Hot section inspections for many modern turbine engines are required on what basis?
  • Who establishes mandatory replacement times for critical turbine engine components?
  • In a data sufficiency problem, which two steps are required?
  • In a divergent nozzle, supersonic flow, which statement is true?
  • Jet engine turbine blades removed for detailed inspection must be reinstalled in which location?
  • In a time-series chart, which pattern indicates seasonal effects?
  • When starting a turbine engine, a hot start is indicated if the exhaust gas temperature exceeds specified limits.
  • Anti-icing of jet engine inlets is commonly accomplished by which method?
  • In the turbine section, which component remains stationary?
  • Usually most of the APU load occurs when
  • Which of the following statements correctly describes stators in both the compressor and turbine sections?
  • On APUs with a free turbine and load compressor, the primary function of the load compressor is to
  • How is fuel scheduling during APU start and varying loads maintained?
  • An advantage of the axial-flow compressor is its
  • What is the expected diameter range of the Unducted Fan designed engines?
  • How does a dual axial-flow compressor improve the efficiency of a turbojet engine?
  • What is the formula for the area of a circle?
  • An APU is usually rotated during start by
  • Simplify the expression: 3a - 2(a - 4).
  • The volume of a rectangular prism with length 6, width 2, and height 3 is what?
  • Which strategy most efficiently handles dense passages?
  • A pie chart shows portions of a whole. Which statement is true?
  • A gas turbine engine comprises which three main sections?
  • What determines the number of rows of stages in an axial-flow compressor?
  • The highest heat-to-metal contact in a jet engine occurs at which component?
  • In a divergent nozzle, supersonic flow, which statement is true?
  • In the dual axial-flow or twin-spool compressor system, the first stage turbine drives the N(2) compressor.
  • Using standard atmospheric conditions, the standard sea level temperature is
  • Recurrent ingestion of dust into a turbine engine can result in which damage?
  • How is the range of a data set calculated?
  • Which strategy is most effective for identifying author bias?
  • When comparing data sets, what does the mean measure?
  • In a dual-spool compressor, the low-speed compressor seeks its own best operating speed.
  • Which option corresponds to the method used for internal inspection of an assembled turbine?
  • Unducted Fan engines are expected to be how many times the size of current turboprop engines?
  • What is the function of the inlet guide vane assembly on an axial-flow compressor?
  • A reasoning fallacy occurs when a conclusion is drawn from insufficient evidence. What is this called?
  • Some engine manufacturers identify turbine discharge pressure in their maintenance manuals as Pt7. What does Pt7 refer to?
  • Which statement about unducted fan engines is explicitly supported by the material?
  • In an axial-flow compressor, which statements about pressure stages are true?
  • What is the relationship between the turbine section and the compressor in a jet engine?
  • What is the primary factor which controls the pressure ratio of an axial-flow compressor?
  • Which law is commonly referred to as the Law of Inertia?
  • An advantage of the axial-flow compressor is its
  • The diffuser section is located between which two sections?
  • Severe rubbing of turbine engine compressor blades will usually cause which damage?
  • Severe rubbing of compressor blades is most commonly associated with which damage mode?
  • What is the primary purpose of compressor field cleaning on turbine engines?
  • Which parameter is considered most critical during turbine engine operation?
Subscribe

Get the latest from Passetra

You can unsubscribe at any time. Read our privacy policy